Design data submission for EAF, LRF and SAf furnaces Company Name Company Email Employee Name Contact No Company Location / State / City Company website Select Charge 1,2,3 or Best of all 3 charges. -- Select Charge 1,2,3 or Best of all 3 charges. --Charge 1Charge 2Charge 3Best of all 3 charges Furnace make Model No. / refractory type EBT/EASTERN Actual Roof Ring Diameter (feet). Rated Capacity-tons metal/heat (Kgs) Transformer full power (KVA) Transformer reduced power (KVA) Cooling glands (YES / NO) Top Charge OR Side charge. No. of charge, slagging, or working doors Roof raised for lancing (YES / NO) Furnaces operated simultaneously (YES / NO) Peak Power Lance Time one charge (power on min.) Melt down rate (T/hr. max.) Time power on to back charge (min.) Weight of each charge (T) Refining time (min) Open area of furnace (sq.ft.) Oxy-Gas Fuel, Burner Fuel (SCFM/min.) Oxy-Gas Fuel, Burner Oxygen (SCFM/min.) Oxy-Gas Fuel, Burner Oxygen (SCFM/min.) Please add below information Please add below information Metallurgical information No. of heats per week Type steel melted Tons charged per heat Tons metal tapped based on % yield/heat Approx. % oil & grease in scrap Charge make-up (%). (Eg, Returns, Scrap, Turnings and borings, Others) Minutes O2 lancing C.F.M. O2 @ S.T.P. % carbon, melt-down Type of slag basic Fluxes added, lbs. per heat (graphite (Lb/min), Carbon/coke (Lb/min), Fluorspar ,Other % carbon as tapped Pellet Addition (Lbs/minute) Avg. & Max. Kw-h per ton metal Tap temperature (deg. F) Please add below information Please add below information Fume Pick-Up In-Place (YES/NO) or any additonal details Vol. & temp of existing system Type of pick up desired (fourth hole) ADDITIONAL INFORMATION 7 + 7 = Submit to Fair Engg Co.
